Balance Rail Bushings

[Jon Page]

>What do you use to get such a good, clean cut at the
>top when you're finished? Razor blade or what?

A razor blade cut through the veneer and cloth against the brass caul.

For the bushing on the left, that was a Bushmaster install. I cut from the
center out with a razor blade once the cauls are removed and then sand
the buttons with a palm sander and 180 grit paper.
-- 

Regards,

Jon Page
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://www.moypiano.com/ptg/pianotech.php/attachments/20080103/5e3a94fc/attachment.html