bridge recapping tools

[Farrell]

Not to toot my own horn, but................

Laminated.

http://www.farrellpiano.com/bridge.htm



Terry Farrell
Farrell Piano, Inc.

terry at farrellpiano.com

----- Original Message ----- 
From: "Bob Hull" <hullfam5 at yahoo.com>
To: "Pianotech List" <pianotech at ptg.org>
Sent: Friday, January 11, 2008 9:09 AM
Subject: bridge recapping tools


>I must dive in to my first treble bridge recapping job.  I have only done a bass bridge thus far and it was only beveled, not notched.   Maybe the difficulty of this job can be taken down a few notches if I get the best tools and wonder what you would recommend.
> 
> I have looked at the Mazzaglia website and saw:
> Bridge pin tri-punches
> Massive chisels
> Bearing saw
> Bearing gauges
> Bearing lines
> Notch tool - for cutting and cleaning the sides of the notches
> Bridge capping washers - is this for putting pressure on the joint while gluing on the new cap?
> 
> Do you recommend PianoTek's bridge capping material or who else.
> 
> I have read Bob Hohf's article on Bridge Recapping - not artilcle more like a book.  Is there another good writing on this ? - need something concise
> I know I'm going to  have a lot of questions on this and will also look over the archives.  
> 
> Thanks.
> 
> Bob Hull
> 
> 
>      ____________________________________________________________________________________
> Never miss a thing.  Make Yahoo your home page. 
> http://www.yahoo.com/r/hs
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://www.moypiano.com/ptg/pianotech.php/attachments/20080111/8030cbfe/attachment-0001.html 
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/jpeg
Size: 42082 bytes
Desc: not available
Url : https://www.moypiano.com/ptg/pianotech.php/attachments/20080111/8030cbfe/attachment-0001.jpe