Pearl River Grand Problem

[Avery Todd]

Mark isn't with Kawai. The last info I have is his Pearl River info. Hope
this is correct.

mwissner at earthlink.net

(800 435 5086 ext 111) bus.

Avery Todd

On Jan 24, 2008 5:25 PM, Steve Blasyak <atuneforyou at hotmail.com> wrote:

>  Hey Now,
>
> I've had the pivot pin fall out on the damper tray of a Pearl River Grand.
> Fairly easy fix. You loosen the opposite side to give you a little wiggle
> room. Dab a bit of the thick gap filling super glue on the pin and stick
> it back in there and it's a done deal. I haven't had it fail again yet. You
> do not need to remove the damper tray. Is there a piece of the broken pin
> protruding out of the damper tray? If so perhaps you could remove it with a
> pair of pliers.
>
> Mark Wisner @ Kawai may be able to help you out with what to use as a
> replacement.
>
> C-ya in Anaheim.
>
> Steve Blasyak
> Orange County Chapter
>
> Pura Vida
>
> ------------------------------
> Need to know the score, the latest news, or you need your Hotmail(R)-get
> your "fix". Check it out. <http://www.msnmobilefix.com/Default.aspx>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://www.moypiano.com/ptg/pianotech.php/attachments/20080124/914adcd8/attachment.html