IMHO, if you will be removing the tuning pin, use a sandpaper shim rather than CA. It works every time, is easy, not messy and more predictable than CA. Terry Farrell ----- Original Message ----- If you pull the pins and swab the hole with either super glue or epoxy, it will add enough "stuff" in the hole to increase torque signficiantly..... les bartlett -------------- next part -------------- An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/20080321/bd1e3b27/attachment.html
This PTG archive page provided courtesy of Moy Piano Service, LLC