Dan,You can see from other replies that a more detailed description of the piano and its deficits, will result in more meaningful answers. Patrick Draine On Mon, Mar 24, 2008 at 11:39 AM, daniel carlton <hacicspe at gmail.com> wrote: > hi all > > i looked for about thirty minutes in the archives for info on this topic, > but i didn't find an answer and i didn't want to wade through 336 more > results from google... > i'm drawing up an estimate for someone and i need to know how many tunings > to include. > so i'm looking in the "G" piano works labor guide for installing an entire > set of oversized pins, and it says it includes one tuning. now i guess i can > understand only needing a tuning and maybe a pitch adjust if you replace and > pull up-to-pitch one pin at a time as you go. but it seems that > one-atta-time is slower than all-at-once gang style. > if you replaced all the pins gang style, you'd need to chip and tune a > few times right? > i think the question i need answered most is if i do it one at a time, > which i can do pretty quickly, is the tuning going to end up pretty close to > pitch when I'm done? > > thanks all > > daniel carlton > -------------- next part -------------- An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/20080324/e451aaa3/attachment.html
This PTG archive page provided courtesy of Moy Piano Service, LLC