[pianotech] Replacing Keyboard Felt

Andrew Anderson anrebe at sbcglobal.net
Thu Nov 6 14:46:17 PST 2008


Thanks,
Guess I'll have to break down and get some hide-glue.

Andrew
On Nov 6, 2008, at 1:45 PM, William Monroe wrote:

> Hi Andrew,
>
> Back Rail felt should be glued only at the front edge.  I apply  
> Alcohol/Water to that edge and let it soak for 20 or 30 minutes,  
> testing it periodically to see when it comes off easily.  When the  
> water has done its work (and I'm patient enough), it will lift right  
> off without much/any felt left behind.  I clean up with a scraper.
>
> Hide glue is preferable to me for replacement.  If you are using the  
> S&S felt/cloth combo, glue the leading edge of both pieces (just the  
> very edge of the red cloth); red cloth is basically centered under  
> the green felt.
>
> William R. Monroe
>
>> I've got a customer with an S&S L artcase that has had a bad   
>> infestation of moths.
>> Last visit I cleaned up a lot but lacked good felt to put under  
>> the  key ends.  What is
>> the most convenient way to get the original felt off?  What kind  
>> of  glue is preferable?
>>
>> Andrew Anderson
>
>
>




More information about the pianotech mailing list

This PTG archive page provided courtesy of Moy Piano Service, LLC