Here is my version of the jig. It is adjustable for height and hammer angle and gives a good support for the whole hammer for filing or any other means of scuffing the tail. Regards, Jack Houweling -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://ptg.org/pipermail/pianotech_ptg.org/attachments/20090415/852c1c56/attachment-0001.html> -------------- next part -------------- A non-text attachment was scrubbed... Name: jig 017.jpg Type: image/jpeg Size: 40915 bytes Desc: not available URL: <http://ptg.org/pipermail/pianotech_ptg.org/attachments/20090415/852c1c56/attachment-0001.jpg>
This PTG archive page provided courtesy of Moy Piano Service, LLC