The first time I saw these kind of jigs was a Hartman article in the Journal...I miss his work... David Ilvedson, RPT Pacifica, CA 94044 ----- Original message ---------------------------------------- From: "Jack Houweling" <jackhouweling at dccnet.com> To: pianotech at ptg.org Received: 4/15/2009 9:48:48 PM Subject: [pianotech] [CAUT] tail scuffing (was Another BaldwinQuestion/backchecks) >Here is my version of the jig. It is adjustable for height and hammer angle and gives >a good support for the whole >hammer for filing or any other means of scuffing the tail. >Regards, >Jack Houweling
This PTG archive page provided courtesy of Moy Piano Service, LLC