Just wondering about pinning hammer flanges. I have always learned to use the swing fit test so each hammer has the same number of swings resulting in a graduation of friction at the flange. I have also learned that adding friction to the progressively less massive hammer assemblies is not a wise thing to do and a constant friction at the flange is more important. What do you do? Gene -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://ptg.org/pipermail/pianotech_ptg.org/attachments/20090422/584e33c9/attachment.html>
This PTG archive page provided courtesy of Moy Piano Service, LLC