Since we are on the subject, AGAIN, (and I didn't start it this time!)..... Do I need to measure the action spread in order to obtain the right brackets, or will a model and serial number suffice? TODD PIANO WORKS Matthew Todd, Piano Technician (979) 248-9578 http://www.toddpianoworks.com --- On Thu, 4/23/09, wimblees at aol.com <wimblees at aol.com> wrote: From: wimblees at aol.com <wimblees at aol.com> Subject: Re: [pianotech] Not again, Young Chang contact for action To: pianotech at ptg.org Date: Thursday, April 23, 2009, 12:18 AM YC will send the action brackets at no charge. But they no longer pay to have them installed. Wim -----Original Message----- From: Dave Bunch <pdtek at mchsi.com> To: pianotech at ptg.org Sent: Wed, 22 Apr 2009 12:21 pm Subject: Re: [pianotech] Not again, Young Chang contact for action I suggest that you charge the customer for the full amount of this repair. I did one two years ago and never got paid anything by Young Chang. Dave Bunch Green cleaning products -- do they work as well? Find out now! -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://ptg.org/pipermail/pianotech_ptg.org/attachments/20090422/10816bb0/attachment.html>
This PTG archive page provided courtesy of Moy Piano Service, LLC