[pianotech] Not again, Young Chang contact for action

[wimblees at aol.com]

Todd

You just need?the model and serial # to get the brackets. You should measure the action spread before removing the old ones, just too make sure you get it correct when you put on the new ones. 

Wim

-----Original Message-----
From: Matthew Todd <toddpianoworks at att.net>
To: pianotech at ptg.org
Sent: Wed, 22 Apr 2009 2:27 pm
Subject: Re: [pianotech] Not again, Young Chang contact for action







Since we are on the subject, AGAIN, (and I didn't start it this time!).....

?

Do I need to measure the action spread in order to obtain the right brackets, or will a model and serial number suffice?



TODD PIANO WORKS 
Matthew Todd, Piano Technician 
(979) 248-9578

http://www.toddpianoworks.com


--- On Thu, 4/23/09, wimblees at aol.com <wimblees at aol.com> wrote:

From: wimblees at aol.com <wimblees at aol.com>
Subject: Re: [pianotech] Not again, Young Chang contact for action
To: pianotech at ptg.org
Date: Thursday, April 23, 2009, 12:18 AM


YC will send the action brackets at no charge. But they no longer pay to have them installed. 

Wim


-----Original Message-----


From: Dave Bunch <pdtek at mchsi.com>
To: pianotech at ptg.org
Sent: Wed, 22 Apr 2009 12:21 pm
Subject: Re: [pianotech] Not again, Young Chang contact for action


I suggest that you charge the customer for the full amount of this repair. I did one two years ago and never got paid anything by Young Chang.?
?
Dave Bunch ?



Green cleaning products -- do they work as well? Find out now! 







-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://ptg.org/pipermail/pianotech_ptg.org/attachments/20090422/3e86db20/attachment.html>