I guess it depends on what the current financial and ownership situation is. The last set I replaced was in June of '07 and I was advised Y-C would supply the brackets but the labor was the customers. Ken Gerler ----- Original Message ----- From: <pmc033 at earthlink.net> To: <pianotech at ptg.org> Sent: Wednesday, April 22, 2009 10:34 PM Subject: Re: [pianotech] Not again, Young Chang contact for action brackets > > If Y.C. is still supplying the brackets free, where's the profit motive > for Pianotek to produce them? When Y.C. were charging $100 or whatever, I > could understand an independent supplier charging less. > The last set I replaced, Y.C. paid $180 for labor. That was last year. > Has that changed? > Paul McCloud > San Diego > >> [Original Message] >> From: Ron Nossaman <rnossaman at cox.net> >> To: <pianotech at ptg.org> >> Date: 04/22/2009 8:11:59 PM >> Subject: Re: [pianotech] Not again, Young Chang contact for action > brackets >> >> Tom Servinsky wrote: >> > I'm surprised the folks at the big supply houses haven't jumped on the >> > bandwagon and started getting these produced for their inventory. Seems >> > like this would be a guaranteed cash-cow for many years to come. >> > Listening Pianotek? >> > Tom Servinsky >> >> I've been wondering about that for years. >> Ron N >> > > >
This PTG archive page provided courtesy of Moy Piano Service, LLC