On Fri, Apr 24, 2009 at 3:01 PM, John Delacour <JD at pianomaker.co.uk> wrote: > At 14:35 -0500 24/4/09, John Formsma wrote: > > On Thu, Apr 23, 2009 at 5:07 PM, John Delacour <JD at pianomaker.co.uk> >> wrote: >> >> To answer the original question, if the winding goes like this ////// you >>> twist clockwise and if it goes like this \\\\\\ you twist anti-clockwise. >>> >> >> Don't you always do it in the direction of the winding? In other words, >> notice which direction the end of the copper winding is headed, and twist >> that way? >> > > Well, isn't that precisely what I said?! > > I didn't get that in as few words from your post, John. But maybe you said it. It's been a long week. <G> -- JF -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://ptg.org/pipermail/pianotech_ptg.org/attachments/20090424/5feae8ea/attachment.html>
This PTG archive page provided courtesy of Moy Piano Service, LLC