[pianotech] Pedal Stops

Gerald Groot tunerboy3 at comcast.net
Sun Apr 26 09:30:39 PDT 2009


What's the difference between an Grand spinet and a Kimball?  A lot of
"small" people had a "grand" ole time building it.  Whereas those at
Kimball, did a lot of "French Licking."  I know, I know, sick joke......  

-----Original Message----- 
From: pianotech-bounces at ptg.org [mailto:pianotech-bounces at ptg.org] On Behalf
Of Will Truitt 
Sent: Sunday, April 26, 2009 12:21 PM 
To: pianotech at ptg.org 
Subject: Re: [pianotech] Pedal Stops 

Hi John: 

We see a lot of old Ivers and Pond uprights here in the Northeast, it being 
a Boston piano. So I have seen the arrangement that you have noted many 
times, and it strikes me as a very good way to limit the pedal travel. 

How about a bad piano joke?  Did you know that Ivers and Pond made a small 
spinet piano also?  It was called the Ivers and Puddle. 

Skulking away now, 

Will Truitt 

-----Original Message----- 
From: pianotech-bounces at ptg.org [mailto:pianotech-bounces at ptg.org] On Behalf

Of John Dorr 
Sent: Sunday, April 26, 2009 10:58 AM 
To: pianotech at ptg.org 
Subject: [pianotech] Pedal Stops 

Hi, 

Same Ivers and Pond upright as shown beneath the "piano window" had this 
interesting pedal arrangment.  Two adjustments for the pedals.  The second 
one is the adjust the total pedal travel - where it stops. I've never seen 
this before.  I thought this was interesting and wanted to share it with the

list. 
   
John Dorr 
Helena, MT 







  _____  

avast! Antivirus <http://www.avast.com> : Outbound message clean. 


Virus Database (VPS): 090425-0, 04/25/2009
Tested on: 4/26/2009 12:30:39 PM
avast! - copyright (c) 1988-2009 ALWIL Software.






More information about the pianotech mailing list

This PTG archive page provided courtesy of Moy Piano Service, LLC