[pianotech] treating bridges with CA

[Barbara Richmond]

Hi Al, 

Do you apply it with the strings in place? 

Barbara 

----- Original Message ----- 
From: "Al Guecia/AlliedPianoCraft" <AlliedPianoCraft at hotmail.com> 
To: pianotech at ptg.org 
Sent: Tuesday, December 1, 2009 7:26:26 AM GMT -06:00 US/Canada Central 
Subject: Re: [pianotech] treating bridges with CA 

Barbara, I also use a very thin epoxy (Rot Doctor is one example, there are 
others) which also works very well. I apply it with a small brush to the 
entire notched area and make sure it gets down into the cracks. It 
penetrates deep into the bridge and fortifies it from further damage. 

Al 



-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://ptg.org/pipermail/pianotech.php/attachments/20091201/4c350fce/attachment.htm>