[pianotech] lyer system question

wimblees at aol.com wimblees at aol.com
Wed Dec 9 01:29:34 MST 2009



Hi Everyone,
A customer of mine, a school, has an Ivers & Pond I believe with this squeaky pedal, the sustain. I tryed and sometimes it squeaked and others it didn't. Also the pedal rods themselves rattle and are noisey.   I have VJ lube for the squeak, but my questions are, the pedal rods seem corroded.  What do you guys/gals use to clean the peal rods get all the gunky feeling off them?  Also, what do you do to take away that rattling of the rods when the pedals are being used?  This pinao needs soo much work, but they are not going to do it.  Thanks everyone
Marshall



Marshall

On the ends of the pedals rod is a pin. That pin fits into a hole that operates the damper system. The pin in the rod is supposed to have a rubber sleeve on it. Or if there is a rubber sleeve, it might be worn away right where it touches the hole in the damper lever. I carry around a foot long section of 1/8" inside diameter rubber hose, which you can get at a auto parts store, that fits onto the pin. In a pinch, you can also wrap the pin with masking tape, but that is only a short term solution. 


Willem (Wim) Blees, RPT 
Piano Tuner/Technician
94-505 Kealakaa Str. 
Mililani, Oahu, HI  96789
808-349-2943 
www.Bleespiano.com
Author of: 
The Business of Piano Tuning 
available from Potter Press 
www.pianotuning.com



-----Original Message-----
From: Marshall Gisondi <pianotune05 at hotmail.com>
To: pianotech at ptg.org
Sent: Tue, Dec 8, 2009 6:17 pm
Subject: [pianotech] lyer system question


Hi Everyone,
A customer of mine, a school, has an Ivers & Pond I believe with this squeaky pedal, the sustain. I tryed and sometimes it squeaked and others it didn't. Also the pedal rods themselves rattle and are noisey.   I have VJ lube for the squeak, but my questions are, the pedal rods seem corroded.  What do you guys/gals use to clean the peal rods get all the gunky feeling off them?  Also, what do you do to take away that rattling of the rods when the pedals are being used?  This pinao needs soo much work, but they are not going to do it.  Thanks everyone
Marshall

Marshall Gisondi Piano Technician
Marshall's Piano Service
pianotune05 at hotmail.com
215-510-9400
Graduate of The School of Piano Technology for the Blind www.pianotuningschool.org Vancouver, WA






Windows Live Hotmail gives you a free,exclusive gift. Click here to download. = 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://ptg.org/pipermail/pianotech.php/attachments/20091209/6f949c5c/attachment.htm>


More information about the pianotech mailing list

This PTG archive page provided courtesy of Moy Piano Service, LLC