paul bruesch wrote: > Piano is a "refurbished" (yeah, right) 1889 Decker Bros (~175cm) grand. > > Two most major issues are damper and jack regulations. I think I've > figured out the dampers... the wire enters the lift flange through the > top (like typical modern ones) but instead of a set screw, they emerge > into a cutout area with a static pin to the left of the wire, and a > drop-screw-looking-thing to the right. I was able to just grab the wire > above the flange and move it up and down, but wondered what the > drop-screw thing is all about. It's a rack and pinion adjustment system! Honest. Ron N
This PTG archive page provided courtesy of Moy Piano Service, LLC