The felt is only needed to bring it to the right measure because the magnetic strip has only 1.5 mm. I could have used plastic, wood or whatever else as well. BTW, what is (was) a collar stay??? Gregor ------------------------------------------ piano technician - tuner - dealer Münster, Germany www.weldert.de > From: ilvey at sbcglobal.net > To: pianotech at ptg.org > Date: Fri, 11 Dec 2009 19:49:30 -0800 > Subject: Re: [pianotech] let off gauge > > Why the felt? Do you see it compress slightly? > > David Ilvedson, RPT > Pacifica, CA 94044 > > ----- Original message ---------------------------------------- > From: "Gregor _" <karlkaputt at hotmail.com> > To: pianotech at ptg.org > Received: 12/11/2009 1:11:46 AM > Subject: [pianotech] let off gauge > > > > >a magnetic stripe with felt: simple and cheap, but effective. > > >Gregor > > >------------------------------------------ > >piano technician - tuner - dealer > >Münster, Germany > >www.weldert.de > > > > > >_________________________________________________________________ > >http://redirect.gimas.net/?n=M0912xXMasGreetings2 > >Nie mehr um Weihnachtsgrüße verlegen: mit tollen Weihnachts-E-Mails _________________________________________________________________ http://redirect.gimas.net/?n=M0912xXMasGreetings2 Nie mehr um Weihnachtsgrüße verlegen: mit tollen Weihnachts-E-Mails -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://ptg.org/pipermail/pianotech.php/attachments/20091212/b7463f2b/attachment.htm>
This PTG archive page provided courtesy of Moy Piano Service, LLC