I agree with that. Sadly, it's a part of the job that's often ignored. David Love www.davidlovepianos.com -----Original Message----- From: pianotech-bounces at ptg.org [mailto:pianotech-bounces at ptg.org] On Behalf Of Ron Nossaman Sent: Wednesday, December 16, 2009 8:36 AM To: pianotech at ptg.org Subject: Re: [pianotech] Follow up report on BB Mason and Weickert felt David Love wrote: > I think the routine for restringing (assuming the plate's coming out) > should always include pulling the old bridge pins, sanding the bridge > top flat (or recapping if necessary) recut the notches and repin > securing the pins as needed. The devil's in the details. I don't consider that detail though. It's basic structure. Ron N
This PTG archive page provided courtesy of Moy Piano Service, LLC