Ron/AL FYI the bridge caps are flat sawn on the BB And the CC 9 ft. Details fer sure. Dale -----Original Message----- From: Ron Nossaman <rnossaman at cox.net> To: pianotech at ptg.org Sent: Wed, Dec 16, 2009 8:35 am Subject: Re: [pianotech] Follow up report on BB Mason and Weickert felt David Love wrote: > I think the routine for restringing (assuming the plate’s coming out) > should always include pulling the old bridge pins, sanding the bridge > top flat (or recapping if necessary) recut the notches and repin > securing the pins as needed. The devil’s in the details. I don't consider that detail though. It's basic structure. Ron N -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://ptg.org/pipermail/pianotech.php/attachments/20091216/251a5fea/attachment.htm>
This PTG archive page provided courtesy of Moy Piano Service, LLC