set up a wet/dry vac. On Thu, Dec 17, 2009 at 1:03 PM, Porritt, David <dporritt at mail.smu.edu>wrote: > That put a lot of lead dust in the air! > > > > dp > > > > David M. Porritt, RPT > > dporritt at smu.edu > > > > *From:* pianotech-bounces at ptg.org [mailto:pianotech-bounces at ptg.org] *On > Behalf Of *Jim Henson > *Sent:* Thursday, December 17, 2009 12:22 PM > *To:* tcole at cruzio.com; pianotech at ptg.org > > *Subject:* Re: [pianotech] key leads > > > > I've just dealt w/ same prob . on an aliquot grand moved to Dallas from N. > Orleans 5 yrs. ago. Initially no problems but 2 mon.s ago sev. keys > unplayable. I put a round 220 grinding wheel in my 3/8/ drill & simply > lifted keys high enough to knock a little of lead off. Touch weight was > negligi- ble, Jim Henson, DFW. > > On Thu, Dec 17, 2009 at 11:33 AM, Thomas Cole <tcole at cruzio.com> wrote: > > I would agree that banging out the expanding leads would risk some chipping > out of the key material. I use a Harbor Freight arbor press for lead removal > and rig up an "anvil" with a hole slightly larger than the lead to support > the wood and minimize the chipping. > > Tom Cole > > > > David Ilvedson wrote: > > If I was to change the leads, I would just replace not re-weigh the action. > This is an old Apollo grand (beautiful Mission case with 6 legs...not a > player)...I'm going to give owner the option of replacing. None of the > keys are cracking yet... > > David Ilvedson, RPT > Pacifica, CA 94044 > > > -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://ptg.org/pipermail/pianotech.php/attachments/20091217/e278c936/attachment.htm>
This PTG archive page provided courtesy of Moy Piano Service, LLC