David Love wrote: > Which begs the question, does the tone come from the relative BP% or the > relative tension. Seems that even if you use a wire that has a higher > BP% the tension is still too low to match the other notes in that > section. On the B you go from about 160lbs to about 120 lbs at the break. Tension's easy, increase wire size. With low tensile strength re-bar you likely just trade one tonal problem for another, but hey, you might dislike the new problem less. The fact is that these pianos are just really bad scale designs, and aren't going to be "fixed" without moving bridges. Even then, doing it right would take you back to the drawing board. Ron N
This PTG archive page provided courtesy of Moy Piano Service, LLC