David You don't necessarily need to sharpen them, but they will clog up when you use them a lot. I would suggest you wipe them clean with a soft cloth and perhaps a little alcohol. Willem (Wim) Blees, RPT Piano Tuner/Technician 94-505 Kealakaa Str. Mililani, Oahu, HI 96789 808-349-2943 www.Bleespiano.com Author of: The Business of Piano Tuning available from Potter Press www.pianotuning.com -----Original Message----- From: David Weiss <davidweiss at embarqmail.com> To: pianotech at ptg.org Sent: Sat, Dec 26, 2009 9:28 am Subject: [pianotech] broaches for flange bushing Hello List, Do the roughened areas of broaches used for flange bushing need to be sharpened periodically? I’m in the middle of re-pinning a set of hammer flanges and it seems some of the broaches cut better than the others. If yes, what’s the best way to sharpen them. Thanks, David Weiss -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://ptg.org/pipermail/pianotech.php/attachments/20091226/d8041446/attachment.htm>
This PTG archive page provided courtesy of Moy Piano Service, LLC