erwinspiano, Why? This is good advise to many of us! > Ughh. supposed to be private > Dale > > > > -----Original Message----- > From: erwinspiano at aol.com > To: pianotech at ptg.org > Sent: Sat, Dec 26, 2009 9:31 pm > Subject: Re: [pianotech] A new soundboard > > > HI Jan > I see nobody responded and so I wanted to do so and also tell you I am > an acquaintance of Andre Ooerbeek. > There are many tricks and tips. A fundamental basic understanding of how > the soundboard system is needed and essential so your goal can be > reached. > Give it a look and then get back to me. > Merry Christmas > Dale Erwin > > > > > -----Original Message----- > From: Jan van Nieukerken <janvan81 at hotmail.com> > To: pianotech at ptg.org > Sent: Wed, Dec 23, 2009 12:19 pm > Subject: [pianotech] A new soundboard > > > > > > > Hello I' am Jan van Nieukerken from the Netherlands , i am new here on > pianotech. > > I have a question about a Blüthner grand I have. It is an old instrument > and I will make a new soundboard In it. > This soundboard has cracks in many places. The only serial number is 4843. > Parallel stringing ( my English is not so good, sorry) > The last years I have repaired soundboards, restringing instruments, > installed new dampers, regulate mechanics etc. > In a small workshop (where I worked as an apprentice) I was involved in > building many fortepiano's. > Now I want to make the step to make a new soundboard. > Tips and tricks are very welcome, I don't have experience about such kind > of things. I don't have any idea about, the costs and the time it's > needed. > > With friendly regards, > > > Jan > > > > > > __________ Informatie van ESET NOD32 Antivirus, versie van database > viruskenmerken 4713 (20091223) __________ > > Het bericht is gecontroleerd door ESET NOD32 Antivirus. > > http://www.eset.com > > >
This PTG archive page provided courtesy of Moy Piano Service, LLC