In other words, push shift then shift 2 while holding down the shift button which will get you to page 310. Then use the page up button to get to whichever page you want from 311 - 589. David Love www.davidlovepianos.com -----Original Message----- From: pianotech-bounces at ptg.org [mailto:pianotech-bounces at ptg.org] On Behalf Of David Love Sent: Sunday, December 27, 2009 12:02 PM To: pianotech at ptg.org Subject: Re: [pianotech] SAT IV extended >From page 11 in the manual. To select a page of memory, turn on the Accu-Tuner, press the TUNE button, press the PAGE up button to step up through the pages of memory. The pages will stop at page "EXAMINEE", release the PAGE up button, press PAGE up button again to enterh the generic tunings on pages 141 to 309. To access the pages of memory from 310 to 589 you will need to turn on the Accu-Tuner, press the TUNE button and then hold down the SHIFT button and then hold down the SHIFT 2 button which will switch the page of memory to 310. Any time you hold down the SHIFT and SHIFT 2 buttons the page number will step up to page 310. David Love www.davidlovepianos.com -----Original Message----- From: pianotech-bounces at ptg.org [mailto:pianotech-bounces at ptg.org] On Behalf Of James Grebe Sent: Sunday, December 27, 2009 11:23 AM To: Pianotech Subject: [pianotech] SAT IV extended I have been using the new machine for about 4 months now and have yet to figure out how to reliably put tunings in the machines EXTENDED memory. Have any of you figured this process out yet?. Thanks, James James Grebe Est. 1962 Piano Tuner-Technician Creator of Custom Caster Cups Creator of fine Writing Instruments www.grebepiano.com 1526 Raspberry Lane Arnold, MO 63010 (314) 608-4137 Become what you believe
This PTG archive page provided courtesy of Moy Piano Service, LLC