[pianotech] SAT IV extended

[paul bruesch]

The manuals (on-line pdfs) say the SAT3 weighs 1#, and the SAT4 weighs 2#,

On Sun, Dec 27, 2009 at 4:43 PM, David Ilvedson <ilvey at sbcglobal.net> wrote:

> Weight is about the same?   Compared to the SAT III?   I don't think so...
>
> David Ilvedson, RPT
> Pacifica, CA  94044
>
> ----- Original message ----------------------------------------
> From: wimblees at aol.com
> To: pianotech at ptg.org
> Received: 12/27/2009 2:37:00 PM
> Subject: Re: [pianotech] SAT IV extended
>
>
>
> >Jim
>
> >I got my SAT IV this summer, and downloaded the disc in my computer. I
> asked Paul
> >several times how to use it, but like you, I found that the instructions
> weren't very
> >clear. It's probably that, like you, I am not very smart when it comes to
> technical
> >things like this. I am going to take my lap top and SAT IV with me to Las
> Vegas this
> >summer, and ask for a hands on instructions.
>
> >Other than that, I like my new toy. The FAC works like the others, but the
> display is
> >easier to read, especially when it's lit up. It's also nice have the name
> and model of
> >pianos in the pre-programmed pages, so that I don't have to get the work
> sheet out
> >every time.  I think the weight is about the same, but the fact that it
> closes up
> >makes it sturdier. However, I think the battery time is a little shorter.
> Also, the
> >machine doesn't give much warning when the battery is low. I get about 5
> minutes,
> >and then it shuts off.  Whereas with the SAT III, I could still do two
> pianos after the
> >low bat sign would go on, before it would shut down.
>
> >Wim
>
>
>
> >-----Original Message-----
> >From: James Grebe <jamesgrebe at charter.net>
> >To: Pianotech <pianotech at ptg.org>
> >Sent: Sun, Dec 27, 2009 9:23 am
> >Subject: [pianotech] SAT IV extended
>
>
> >I have been using the new machine for about 4 months now and have yet to
> figure
> >out how to reliably put tunings in the machines EXTENDED memory. Have any
> of you
> >figured this process out yet?.
> >Thanks,
> >James
> >James Grebe Est. 1962
> >Piano Tuner-Technician
> >Creator of Custom Caster Cups
> >Creator of fine Writing Instruments
> >www.grebepiano.com
> >1526 Raspberry Lane
> >Arnold, MO 63010
> >(314) 608-4137
> >Become what you believe
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://ptg.org/pipermail/pianotech.php/attachments/20091227/667c3431/attachment-0001.htm>