Thanks Scott. I was considering drilling a 12.5 mm hole and plugging it with laminated maple pin block plugs. I'll post Ron for the idea you suggest. Thanks mate Dale -----Original Message----- From: Scott Jackson <scottwaynejackson at gmail.com> To: pianotech at ptg.org Sent: Sun, Dec 27, 2009 7:40 pm Subject: Re: [pianotech] Franz-Fuchs,Wein 1906? Good find Dale. Well done. For least intrusive pin-block repair, I think that Ron Overs has mentioned making 0.5mm rock maple veneer collars for the pin holes. If he's listening in..........? Scott Jackson Wollongong Australia erwinspiano at aol.com wrote: > To P-tech List > > ...I have come across a Beautiful 6 ft Austrian? piano* named Franz > Fuchs,Wein* It has a Piano forte -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://ptg.org/pipermail/pianotech.php/attachments/20091227/055ef04c/attachment.htm>
This PTG archive page provided courtesy of Moy Piano Service, LLC