When replacing a broken string on a console, I accidentally threaded the new string under the pressure bar but on the wrong side of one of the screws that hold down the pressure bar. Can I remove the screw and then slide the string over and then replace the screw? Brian P. Doepke, RPT A.A.A. Piano Works, LLC Piano Tuning + Service -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://ptg.org/pipermail/pianotech_ptg.org/attachments/20090212/e5c243d5/attachment.html>
This PTG archive page provided courtesy of Moy Piano Service, LLC