Brian You can remove the screw, but then you'll have to retune that section. Or you can put on a new string. 6 of one, half dozen of another. Willem (Wim) Blees, RPT Piano Tuner/Technician Mililani, Oahu, HI 808-349-2943 Author of: The Business of Piano Tuning available from Potter Press www.pianotuning.com -----Original Message----- From: Brian Doepke <bdoepke at verizon.net> To: pianotech at ptg.org Sent: Thu, 12 Feb 2009 2:05 pm Subject: [pianotech] Ooops... When replacing a broken string on a console, I accidentally threaded the new string under the pressure bar but on the wrong side of one of the screws that hold down the pressure bar. ? Can I remove the screw and then slide the string over and then replace the screw? ? Brian P. Doepke, RPT A.A.A. Piano Works, LLC Piano Tuning + Service ? -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://ptg.org/pipermail/pianotech_ptg.org/attachments/20090212/14cc213d/attachment.html>
This PTG archive page provided courtesy of Moy Piano Service, LLC