You can't let down the tension, remove the coil and sneek it under the pressure bar? Are emailing from the job site? I'd just do it over... David Ilvedson, RPT Pacifica, CA 94044 Original message From: "Brian Doepke" To: Received: 2/12/2009 4:05:35 PM Subject: [pianotech] Ooops... When replacing a broken string on a console, I accidentally threaded the new string under the pressure bar but on the wrong side of one of the screws that hold down the pressure bar. Can I remove the screw and then slide the string over and then replace the screw? Brian P. Doepke, RPT A.A.A. Piano Works, LLC Piano Tuning + Service -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://ptg.org/pipermail/pianotech_ptg.org/attachments/20090212/d81c5b19/attachment-0001.html>
This PTG archive page provided courtesy of Moy Piano Service, LLC