[pianotech] Erwins key dip gauge

[pianolady50 at peoplepc.com]

Sure thing.  As soon as I get to the shop in the morning.

Debbie L.
  ----- Original Message ----- 
  From: erwinspiano at aol.com 
  To: pianotech at ptg.org 
  Sent: Friday, February 27, 2009 6:08 PM
  Subject: Re: [pianotech] Erwins key dip gauge


  Can you measure them?  Just curious
    makkes sense to have different sizes
    Dale


  -----Original Message-----
  From: pianolady50 at peoplepc.com
  To: pianotech at ptg.org
  Sent: Fri, 27 Feb 2009 1:02 pm
  Subject: Re: [pianotech] Erwins key dip gauge


  Yep, the ends are different sizes.  One is brass the other aluminum for quick visual reference while using.  I haven't used one in a while and can't, for the life of me, remember each end's diameter.  Having the double end also makes for a nice handle and better balance.

  Debbie L.
    ----- Original Message ----- 
    From: erwinspiano at aol.com 
    To: pianotech at ptg.org 
    Sent: Friday, February 27, 2009 11:41 AM
    Subject: Re: [pianotech] Erwins key dip gauge


    HI Debbie
     Very similar & douple ended. Are these different diameters?
      Dale









------------------------------------------------------------------------------
  Looking for work? Get job alerts, employment information, career advice and job-seeking tools at AOL Find a Job. 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://ptg.org/pipermail/pianotech_ptg.org/attachments/20090227/33a089dd/attachment.html>