[pianotech] Erwins key dip gauge

[pianolady50 at peoplepc.com]

Dale,

The dip gauge measurements for the double ended gauge are:

Brass end - .412
Aluminum end - .374 (3/8)

Debbie L.
  ----- Original Message ----- 
  From: erwinspiano at aol.com 
  To: pianotech at ptg.org 
  Sent: Friday, February 27, 2009 6:08 PM
  Subject: Re: [pianotech] Erwins key dip gauge


  Can you measure them?  Just curious
    makkes sense to have different sizes
    Dale



  . 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://ptg.org/pipermail/pianotech_ptg.org/attachments/20090228/04b50ad8/attachment-0001.html>