"But you have not had this problem?" Nope, no problem at all! ;-) Terry Farrell ----- Original Message ----- Sorry for the time lag--just getting caught up on this thread. Interesting that you use 1o tuning pins. The one "experiment" I have heard about using smaller diameter tuning pins in a piano where there is plate webbing over the tuning pin field did not turn out well. The conclusion was that the smaller diameter pin flag-poled too much with the coil that far from the pin block (unlike in the "open-window" pin blocks of pianos like Bosendorfer that allow the coils to be just slightly above the block itself, not above the plate webbing, which adds several mm to the distance from the block). But you have not had this problem? Thanks, Alan Eder -----Original Message----- I haven't used #2 pins in one of these blocks - only #1 pins. Terry Farrell -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://ptg.org/pipermail/pianotech_ptg.org/attachments/20090108/5bf8764f/attachment-0001.html> -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: image/jpeg Size: 57307 bytes Desc: not available URL: <http://ptg.org/pipermail/pianotech_ptg.org/attachments/20090108/5bf8764f/attachment-0001.jpe>
This PTG archive page provided courtesy of Moy Piano Service, LLC