Thanks Ron and David. Just what I needed. Al -------------------------------------------------- From: "David Love" <davidlovepianos at comcast.net> Sent: Thursday, April 30, 2009 11:21 PM To: <pianotech at ptg.org> Subject: Re: [pianotech] Retrofitting a Steinway w/adjustable back action > > Here are a couple of other photos. The capstans are from Schaff. Sadly, > they no longer carry the 11/16" long ones (559C on page 132) which are > perfect length and you have to go to the next one 559 D which sometimes > require trimming when the protrude through the bottom of the damper tray. > But being brass that's not too difficult. The recess in the tray can be > easily done with a laminate trimmer base (Porter Cable model 3091) which > happens to index perfectly off the Renner tray without a jig, and a small > router bit. Some people also use a table saw for that operation. It's > pretty easy and beats cutting little strips of sandpaper and shoving it > under a piece of felt. > > > David Love > www.davidlovepianos.com >
This PTG archive page provided courtesy of Moy Piano Service, LLC