In a message dated 5/27/2009 9:16:26 A.M. Central Daylight Time, nelsong at intune88.com writes: Altering back scale bearing is done by moving the alaquots? Altering back scale bearing is done depending on the system. Bearing can be changed simply by adding or subtracting felt on the bearing bar in lesser pianos. Moving the aliquots toward the bridge increases bearing and the reverse decreases bearing. Grinding off aliquots to alter bearing is possible. Building up aliquots is also possible. Lots of ways to work with the back bearing. Paul **************We found the real ‘Hotel California’ and the ‘Seinfeld’ diner. What will you find? Explore WhereItsAt.com. (http://www.whereitsat.com/?ncid=emlwenew00000004) -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://ptg.org/pipermail/pianotech.php/attachments/20090527/89b13a46/attachment.htm>
This PTG archive page provided courtesy of Moy Piano Service, LLC