David, How do you know if any/which of the others will fail? Take the underlever tray over to your drill press and make some sawdust. Drill and fit screws in all, instead of possibly tearing wood and certainly affecting alignment of the beasties by removing and regluing. my 2¢ Conrad Hoffsommer > From: da88ve at gmail.com > To: pianotech at ptg.org > Date: Fri, 20 Nov 2009 04:18:55 -0700 > Subject: [pianotech] S&S glued underlever flanges > > I know there's probably an archive thread on this, but I > have problems finding stuff in the archives. On those old > Steinways where the damper flanges are glued to the back action > rail (no flange screws): when they come loose, is the only > option to remove all the dampers, pull out the back action, and > and re-glue them all? > --David Nereson, RPT > -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://ptg.org/pipermail/pianotech.php/attachments/20091120/fddab74e/attachment.htm>
This PTG archive page provided courtesy of Moy Piano Service, LLC