I looked through my TT&T index (pretty handy). What you need is the October 2008 Journal, Pitman Length Gauge – Jude Reveley. Barbara Richmond, RPT near Peoria, Illinois ----- Original Message ----- From: "Matthew Todd" <toddpianoworks at att.net> To: pianotech at ptg.org Sent: Thursday, April 22, 2010 9:04:14 AM GMT -06:00 US/Canada Central Subject: [pianotech] Pitman Dear friends, I have a Cable & Sons Grand (early 1920's), that has a missing pitman. After looking in both Schaff and PianoTek I realize that this is something I may need to make on my own. It doesn't look to complicated, however, I would like to make sure I take the appropriate and accurate measurements so I can make one to do as little adjusting as possible when I am through. Comments please, thanks. TODD PIANO WORKS Matthew Todd, Piano Technician (979) 248-9578 http://www.toddpianoworks.com -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://ptg.org/pipermail/pianotech.php/attachments/20100422/9e037ab3/attachment.htm>
This PTG archive page provided courtesy of Moy Piano Service, LLC