[pianotech] Glue Strength for Pedal Lyre Repair

[Jon Page]

>>>  >>However, since you have already glued it. I would recommend adding the
>>>  >>dowels perpendicular to the long axis (grain direction) of the top
>>>  >>block
>>  >Easier than that: Install screws. Counter-sink them if necessary.
>>  >No more gluing, drill and done.  Hex head, threaded full length.
>But dowels look more craftsmanlike...imho

The bolt heads are on the rear of the lyre. If it is appearance,
then drill 1/4" holes and bang in segments of old pedal rods
for reinforcement.

Regards,

Jon Page
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://ptg.org/pipermail/pianotech.php/attachments/20100430/d0e1e1d1/attachment.htm>