[pianotech] Tell me I'm right?

[Lou Novak]

It has screws.
  ----- Original Message ----- 
  From: Phil Ryan<mailto:pryan2 at the-beach.net> 
  To: pianotech at ptg.org<mailto:pianotech at ptg.org> 
  Sent: Sunday, August 15, 2010 4:54 PM
  Subject: [pianotech] Tell me I'm right?


    An institution that I tune for just put their new Yamaha C3 on a 
  spider (Y shaped) dolly.  They were unable to remove the wheels from the 
  piano, but put it on with the wheels intact.  When I arrived they asked 
  me if they should remove the wheels and how to do it.  I told them yes, 
  they should remove the wheels to get correct pedal height(and safety) 
  and they could remove the wheels by prying them out of the leg with a 
  big screwdriver.  Tell me I'm right. (No screws etc.)?

  The customer has since left town (Cruiseship) so I can't get back to 
  them if I'm wrong.

  Phil Ryan
  Miami Beach


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://ptg.org/pipermail/pianotech.php/attachments/20100815/338aad6a/attachment.htm>