Jon, www.mscdirect.com - A quick check found sizes up to 20mm with an incredible array of step sizes, especially in the smaller diameters. Allan Allan Gilreath, RPT Registered Piano Technician President - Allan Gilreath & Associates, Inc. website - www.allangilreath.com <http://www.allangilreath.com> email - allan at allangilreath.com <mailto:allan at allangilreath.com> phone - 706 602-7667 On 12/27/2010 3:34 PM, Jon Page wrote: > I have been looking on the net for drill bits in the 13 to 15mm range. > > I have found some pricey metal drilling bits at McMaster-Carr but was > wondering if someone already has a source for wood bits. > > I thought Lee Valley would have had them. -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://ptg.org/pipermail/pianotech.php/attachments/20101228/17bb0143/attachment.htm> -------------- next part -------------- A non-text attachment was scrubbed... Name: 2007-RPT-Logo-Web.jpg Type: image/jpeg Size: 13287 bytes Desc: not available URL: <http://ptg.org/pipermail/pianotech.php/attachments/20101228/17bb0143/attachment.jpg>
This PTG archive page provided courtesy of Moy Piano Service, LLC