On 12/28/2010 9:55 PM, Dean May wrote: > On some small grands, like the 4'10 Samick, there isn't enough room to > fabricate the sostenuto mechanism without huge amounts of rework. > PianoDisc's position is that all installs should end up with 3 > functioning pedals. Some dealers want cheap installs and one way to do > that is cut out the time required to fabricate the sostenuto linkage. > Dean I've yet to see an original install where all three pedals work well, and have since the Pianocorder days, retrofitted a more workable sostenuto (primarily) on those that the owner wanted to actually function. The sustain solenoid on the old Pianocorder system was utterly hopeless. Ron N
This PTG archive page provided courtesy of Moy Piano Service, LLC