Also to make a suitably-sized fit, pull strands out to reduce the diameter. >I'm getting into this late and have not read all posts but to make an >appropriately sized cord there is a specific procedure. > >You want the lead end to be pointed to insert into the flange. To >accomplish this, start with a length of stranded cord and pull numerous >strands from the non-lead end to maybe 2". Pull numerous other strands >to 1". Pull the lead end sleeve taut to a point. You get the picture. > >Pull which0-ever various strands to different lengths to create a >graduated taper. > >Harden the lead end with your favorite glue in order to thread it through the >flange yokes. -- Regards, Jon Page -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://ptg.org/pipermail/pianotech.php/attachments/20100212/4e619c49/attachment.htm>
This PTG archive page provided courtesy of Moy Piano Service, LLC