Thank you Paul for your response. I am glad all worked-out for you. For the record, if there is anyone out there that thinks for one minute that I am protecting a particular manufacture, then you don't know me. However, I believe there is a gentleman's way of doing business and letting "due process" run its course. I am finding on this forum that there are some more interested in the "politically charged" than numbers. Thanks again Paul for your response. James -----Original Message----- From: pianotech-bounces at ptg.org [mailto:pianotech-bounces at ptg.org] On Behalf Of Paul McCloud Sent: Wednesday, February 24, 2010 12:05 PM To: pianotech at ptg.org Subject: Re: [pianotech] Tuning pin torque?!?!? Some time ago, I posted a complaint on this list about a particular brand of piano, more like venting my frustration about the way that it tuned. Perhaps my post was not worded properly, but my post was picked up by someone monitoring this list. Somehow my comments had been misunderstood to mean the pianos were untunable. This was not what I intended to say, but somebody thought that's what I meant. Next thing I know, my boss called me into the office. He called me every name in the book. I nearly lost my job and company the piano line. I had to call and apologize for my mistake to the distributor/manufacturer. Somehow, my apology was accepted, and everything was forgotten. I was told by my boss that I could have been sued. Had I not mentioned the brand name, nothing further would have happened. Since then, I'm very careful not to mention names. Be careful what you write on the internet. It's out there forever, somewhere. FWIW. Paul McCloud San Diego On 02/24/2010 9:24 AM, Chuck Behm wrote: > >The brand is irrelevant to the question. The question is a general > question > about pin torque, not specific to one particular brand. Thanks for your > inquiry. James.< > > > James - I'm curious as well. I believe the brand involved is a very > relevant issue. Some brands have a reputation for various issues related > pin tightness such as lack of torque, overly tight racheting pins, > inconsistent torque, sponginess, etc., while other brands are known for > consistently having good torque and smooth turning pins. Is the problem > you're noticing an anomaly, or is it par for the course? As David said, > "Inquiring minds want to know." > > If you had posted on a car forum about an automobile having a problem > with a throttle that was sticking to the floor, causing unchecked > acceleration, wouldn't it be relevant to know whether it was a Toyota, > or a Ford? Chuck Behm
This PTG archive page provided courtesy of Moy Piano Service, LLC