David: I like this! When planing the key fronts, what do you use to register the front of the key for a uniform cut? On Fri, Jan 1, 2010 at 8:14 PM, David Love <davidlovepianos at comcast.net> wrote: > I use this set up with a router. Just the router base is pictured but you > adjust the router in the base to get the depth of cut you want. > > > > David Love > > www.davidlovepianos.com > > > > From: pianotech-bounces at ptg.org [mailto:pianotech-bounces at ptg.org] On Behalf > Of erwinspiano at aol.com > Sent: Friday, January 01, 2010 5:59 PM > To: pianotech at ptg.org > Subject: Re: [pianotech] Key wood prep....was....Applying PVC-E > > > > > > On a different subject, how do all of you mill and prepare the top of the > key prior to gluing on tops. > > > > Dale Erwin > > -- Duane McGuire 801-830-5858 http://blog.duanemcguire.com
This PTG archive page provided courtesy of Moy Piano Service, LLC