I use this set up with a router. Just the router base is pictured but you adjust the router in the base to get the depth of cut you want. David Love www.davidlovepianos.com From: pianotech-bounces at ptg.org [mailto:pianotech-bounces at ptg.org] On Behalf Of erwinspiano at aol.com Sent: Friday, January 01, 2010 5:59 PM To: pianotech at ptg.org Subject: Re: [pianotech] Key wood prep....was....Applying PVC-E On a different subject, how do all of you mill and prepare the top of the key prior to gluing on tops. Dale Erwin -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://ptg.org/pipermail/pianotech.php/attachments/20100101/cda7840f/attachment-0001.htm> -------------- next part -------------- A non-text attachment was scrubbed... Name: P7120076.jpg Type: image/jpeg Size: 61086 bytes Desc: not available URL: <http://ptg.org/pipermail/pianotech.php/attachments/20100101/cda7840f/attachment-0002.jpg> -------------- next part -------------- A non-text attachment was scrubbed... Name: P7120077.jpg Type: image/jpeg Size: 69832 bytes Desc: not available URL: <http://ptg.org/pipermail/pianotech.php/attachments/20100101/cda7840f/attachment-0003.jpg>
This PTG archive page provided courtesy of Moy Piano Service, LLC