You are most welcome. Do make sure you thoroughly rinse the brass after pulling out of the tarnish remover. You do not want any residue left on there continuing to work on the brass. Mark Potter ________________________________ From: Paul Milesi <paul at pmpiano.com> Re: [pianotech] Cleaning and Polishing Brass Pedals & Face Plate, etWow! Thank you, Mark. Much appreciated. I am not a rebuilder per se, and don’t do a whole lot of brass cleaning--the occasional pedal stuff mostly—but certainly will try this, since the hand buffing thing takes too much time and energy, especially compared to what you describe. Thank you. ________________________________ -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://ptg.org/pipermail/pianotech.php/attachments/20100110/436a9482/attachment-0001.htm>
This PTG archive page provided courtesy of Moy Piano Service, LLC