http://www.pianobolduc.com/index.asp?lang=eng On Sun, Jan 10, 2010 at 8:53 PM, David Ilvedson <ilvey at sbcglobal.net> wrote: > Of course if the coil goes back down, you don't have enough tension. My > flat steel tool from Pianotek, I think...broke...I've broke a couple. The > flat steel is too thin and bends back and forth and then breaks. I'm going > for the Canadian one. Is that Bolduc.com? > > David Ilvedson, RPT > Pacifica, CA 94044 > -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://ptg.org/pipermail/pianotech.php/attachments/20100110/8aced9e8/attachment.htm>
This PTG archive page provided courtesy of Moy Piano Service, LLC