Scoop out the bridge under the string line until the string just grazes the top of the bridge whilst held tight and down onto the particular shim. Done at 3 locations on the bass bridge and about 9 or 10 on the treble bridge. Then plane the bridge tops down to those markings. Will From: pianotech-bounces at ptg.org [mailto:pianotech-bounces at ptg.org] On Behalf Of David Love Sent: Monday, January 11, 2010 11:34 PM To: pianotech at ptg.org Subject: Re: [pianotech] Rebuilding tips What is your "as usual from there"? David Love www.davidlovepianos.com I just reach into the box and get the thickness I want, run the string through the agraffe and over the bridge, and lower it onto the top of the shim. Adjust bridge height as usual from there. Will Truitt -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://ptg.org/pipermail/pianotech.php/attachments/20100112/9decb1ef/attachment-0001.htm>
This PTG archive page provided courtesy of Moy Piano Service, LLC