On Jan 13, 2010, at 2:33 PM, Ron Nossaman wrote: > Sorry, I don't seem to have a photo of the trap work connection, but it's pretty straightforward and as simple as I could make it. Attached are photos of Ron's trap work connection. (I suspect subsequent versions of the installation avoid placing a screw in the steel bracket directly above the trap lever. 8^) Kent 101_0329 101_0330 101_0333 -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://ptg.org/pipermail/pianotech.php/attachments/20100113/eca446e1/attachment-0001.htm> -------------- next part -------------- A non-text attachment was scrubbed... Name: 101_0329.jpg Type: image/jpeg Size: 23946 bytes Desc: not available URL: <http://ptg.org/pipermail/pianotech.php/attachments/20100113/eca446e1/attachment-0003.jpg> -------------- next part -------------- A non-text attachment was scrubbed... Name: 101_0330.jpg Type: image/jpeg Size: 37704 bytes Desc: not available URL: <http://ptg.org/pipermail/pianotech.php/attachments/20100113/eca446e1/attachment-0004.jpg> -------------- next part -------------- A non-text attachment was scrubbed... Name: 101_0333.jpg Type: image/jpeg Size: 40807 bytes Desc: not available URL: <http://ptg.org/pipermail/pianotech.php/attachments/20100113/eca446e1/attachment-0005.jpg>
This PTG archive page provided courtesy of Moy Piano Service, LLC