Kent Swafford wrote: > > On Jan 13, 2010, at 2:33 PM, Ron Nossaman wrote: > >> Sorry, I don't seem to have a photo of the trap work connection, but >> it's pretty straightforward and as simple as I could make it. > > > Attached are photos of Ron's trap work connection. > > (I suspect subsequent versions of the installation avoid placing a screw > in the steel bracket directly above the trap lever. 8^) Thanks Kent, they do (sorry about that). The attachment to the trap lever is a lot simpler now too. I should have drilled you a 5/16" access hole through the lever below that screw, or used a hex head. <G> Ron N
This PTG archive page provided courtesy of Moy Piano Service, LLC